If you feel the 572XP is already dialed in, 2026 still offers a few OEM upgrades worth comparing. You can improve fit, increase durability, and keep performance consistent with the right bar, filter, coil, guards, buffers, wrap kit, and matched chain.
The details matter more than you might expect, and the best choices are not always the most obvious, especially when compatibility separates the good from the truly reliable.
| Husqvarna Genuine 579504001 Handle Wrap Kit Fits 572XP OEM |  | Best Replacement Part | Product Type: Handle wrap kit | Brand/OEM: Husqvarna genuine OEM | 572XP Fit: Fits 572XP | VIEW LATEST PRICE | Read Our Analysis |
| Husqvarna OEM Chainsaw Bar 20″ 3/8″ .058 |  | Best Guide Bar | Product Type: Guide bar | Brand/OEM: Husqvarna OEM | 572XP Fit: Fits 572XP | VIEW LATEST PRICE | Read Our Analysis |
| Husqvarna Genuine 596762302 HD 25 Micron Air Filter H572 Fits 565 572XP |  | Best Air Filter | Product Type: Air filter | Brand/OEM: Husqvarna genuine OEM | 572XP Fit: Fits 572XP | VIEW LATEST PRICE | Read Our Analysis |
| ACTIVLIFE for Husqvarna 565 572 XP/XPG Hand Guard |  | Best Hand Guard | Product Type: Hand guard | Brand/OEM: Aftermarket | 572XP Fit: Fits 572 XP/XPG | VIEW LATEST PRICE | Read Our Analysis |
| Husqvarna Chainsaw Fuel Tank AV Buffer Replacement |  | Best Budget Replacement | Product Type: Fuel tank AV buffer | Brand/OEM: Aftermarket replacement | 572XP Fit: Fits 572XP | VIEW LATEST PRICE | Read Our Analysis |
| Husqvarna OEM 372XP 395XP 562XP 572XP 36″ Bar 3/8″.063″ |  | Best Heavy-Duty Bar | Product Type: Guide bar | Brand/OEM: Husqvarna OEM | 572XP Fit: Fits 572XP | VIEW LATEST PRICE | Read Our Analysis |
| for Ignition Coil for Husqvarna 572XP 588193102 |  | Best Ignition Coil | Product Type: Ignition coil | Brand/OEM: Replacement part | 572XP Fit: Fits 572XP | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Husqvarna Genuine 579504001 Handle Wrap Kit Fits 572XP OEM
If you need a genuine replacement for your 572XP, the Husqvarna 579504001 Handle Wrap Kit is a solid choice for keeping your saw OEM-correct and ready to work. You get a brand-new, genuine Husqvarna part designed for equipment that uses part number 579504001. It fits the 572XP and may also fit select AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, Sears, and Weed Eater machines. Before ordering, confirm your model, spec, and serial number, since appearance alone can be misleading.
- Product Type:Handle wrap kit
- Brand/OEM:Husqvarna genuine OEM
- 572XP Fit:Fits 572XP
- Part Number:579504001
- Replacement Use:Direct replacement
- Power System:Gas chainsaw
- Additional Feature:Genuine OEM part
- Additional Feature:Direct replacement component
- Additional Feature:Fits multiple brands
Husqvarna OEM Chainsaw Bar 20″ 3/8″ .058
If you need a genuine OEM replacement bar for a Husqvarna 572XP, this 20-inch Husqvarna guide bar is a strong fit. It uses Husqvarna part 596007572, built as the HT388-72 DL with a 3/8″ pitch, .058″ gauge, and 72 drive links. It also fits select 272XP, 372XP, 395XP, and 562XP saws. At just 1.3 pounds, it adds minimal bulk while helping maintain proper cutting balance. Order by model, spec, and serial number, not appearance, to confirm fit.
- Product Type:Guide bar
- Brand/OEM:Husqvarna OEM
- 572XP Fit:Fits 572XP
- Part Number:596007572
- Replacement Use:OEM replacement
- Power System:Gas chainsaw
- Additional Feature:20-inch bar length
- Additional Feature:72 drive links
- Additional Feature:HT388 bar designation
Husqvarna Genuine 596762302 HD 25 Micron Air Filter H572 Fits 565 572XP
Should you need a genuine replacement air filter for your Husqvarna 565 or 572XP, the Husqvarna 596762302 HD 25 Micron Air Filter H572 is a smart fit. You get a vehicle specific HD replacement part that helps protect your engine with 25 micron filtration. Since it is an OEM Husqvarna component, you can trust the 596762302 part number for correct fit and function. The unit count is one, so you can replace a single worn filter easily. It is listed in lawn mower air filters, has nine customer reviews, and you can check Amazon’s 30 day return policy and seller warranty details.
- Product Type:Air filter
- Brand/OEM:Husqvarna genuine OEM
- 572XP Fit:Fits 572XP
- Part Number:596762302
- Replacement Use:Replacement part
- Power System:Gas chainsaw
- Additional Feature:25 micron filtration
- Additional Feature:HD air filter
- Additional Feature:Vehicle-specific fit
ACTIVLIFE for Husqvarna 565 572 XP/XPG Hand Guard
ACTIVLIFE’s hand guard is a practical choice if you need a compatible replacement for Husqvarna 565, 572 XP, or 572 XPG and want added protection for your hands and controls during operation. It offers a useful, well-made accessory that supports reliable performance and helps make repairs easier. The replacement part fits your saw setup and can help you work with more confidence during maintenance or cutting tasks. If you are comparing options for your Best 572xp for 2026 guide, this high-quality guard is a straightforward upgrade. It is supported by manufacturer details and product listings.
- Product Type:Hand guard
- Brand/OEM:Aftermarket
- 572XP Fit:Fits 572 XP/XPG
- Part Number:B0D2WCFW1W
- Replacement Use:Replacement guard
- Power System:Gas chainsaw
- Additional Feature:Compatible with XPG
- Additional Feature:Protects hands and controls
- Additional Feature:Stylish accessory design
Husqvarna Chainsaw Fuel Tank AV Buffer Replacement
In case you are looking to restore the anti-vibration support on a Husqvarna 565 or 572XP, the WUXIUFU Fuel Tank AV Buffer replacement is a straightforward fit for 572XP, 572XP G, 572XP GW, and 572XP W models. You get a replacement for Husqvarna OEM 503 85 41 04, also listed as 503854104. This gasoline powered chainsaw part includes one AV buffer and carries product identifiers like UPC 755097998135 and ASIN B0D8PPFBHQ. If your tank mounting feels worn, this buffer can help tighten up the setup. Check the product page for warranty details and Amazon’s 30 day return policy.
- Product Type:Fuel tank AV buffer
- Brand/OEM:Aftermarket replacement
- 572XP Fit:Fits 572XP
- Part Number:503854104
- Replacement Use:Replacement buffer
- Power System:Gas-powered
- Additional Feature:AV buffer component
- Additional Feature:Replaces 503854104
- Additional Feature:Suitable for 572XP G
Husqvarna OEM 372XP 395XP 562XP 572XP 36″ Bar 3/8″.063″
Should you need a genuine OEM guide bar that fits the Husqvarna 372XP, 395XP, 562XP, and 572XP, this 36-inch Husqvarna bar is a strong choice for heavy-duty cutting. You get Husqvarna part 596008215, built with a 3/8″ pitch, .063″ gauge, and 115 drive links for proper fit and reliable chain tracking. At 2.64 pounds, it remains manageable for a bar this long. Because Husqvarna still makes it, you can trust OEM quality, and you will not need batteries or guesswork. If you want a direct replacement, this bar keeps your saw working as intended.
- Product Type:Guide bar
- Brand/OEM:Husqvarna OEM
- 572XP Fit:Fits 572XP
- Part Number:596008215
- Replacement Use:OEM replacement
- Power System:Gas chainsaw
- Additional Feature:36-inch bar length
- Additional Feature:115 drive links
- Additional Feature:Heavy-duty OEM bar
for Ignition Coil for Husqvarna 572XP 588193102
The ignition coil for Husqvarna 572XP, part number 588193102, is a smart choice if you want a reliable replacement that helps restore consistent engine ignition and keep your saw running efficiently. You will get a part made for the listed 572XP model, so verify fit by comparing the dimensions and photos before you buy. Once installed, it can improve engine performance and fuel efficiency. You will not need professional help, since it is easy to install. If your saw’s ignition has weakened, this replacement can help you get back to dependable cutting fast.
- Product Type:Ignition coil
- Brand/OEM:Replacement part
- 572XP Fit:Fits 572XP
- Part Number:588193102
- Replacement Use:Replacement ignition coil
- Power System:Gas chainsaw
- Additional Feature:Reliable engine ignition
- Additional Feature:Easy to install
- Additional Feature:Improves fuel efficiency
Factors to Consider When Choosing 572xp
When choosing a 572XP, start with genuine OEM parts and make sure the fit matches your exact model. You should also confirm bar length options, chain pitch and gauge, and air filter compatibility before you buy. These details help you avoid mismatches and keep your saw running at its best.
Genuine OEM Parts
Genuine OEM parts are the safest starting point for a 572XP because they are built to match your saw’s exact model and serial specifications, which helps avoid fitment problems and keeps installation straightforward. You should choose OEM components to preserve the saw’s original tolerances, materials, and safety standards. That keeps performance consistent and supports warranty compliance. Whenever you replace filters, ignition parts, or structural components, OEM options help maintain the manufacturer’s intended service intervals and overall lifespan. Do not trust visual similarity alone. Always verify part numbers against the parts list so you get the right pitch, gauge, drive link count, or mounting interface. Although OEM parts often cost more upfront, they can reduce repair frequency, limit premature wear, and protect resale value over time.
Exact Model Fit
Exact model fit matters because a 572XP can vary by production run, so you should verify the exact model designation and serial number before ordering any replacement part. You should also confirm the exact part number or specification you need, whether that is pitch, gauge, drive links, or filter micron rating. Do not trust a visual match alone, because small differences can stop a part from fitting correctly. Check whether your saw is a standard, XPG, or GW variant, since mounting points and dimensions can change. Compare measurements such as length, hole spacing, and connector type with the replacement part’s technical specs. Before you buy, review the manufacturer’s fitment chart or service manual for model specific notes and compatibility warnings, so you avoid costly mistakes.
Bar Length Options
Once you have confirmed the exact 572XP variant and fitment details, the next major choice is bar length, since it directly affects how the saw handles and what it can cut. If you want nimble control for limbing, pruning, or working in tight spaces, choose a shorter bar in the 12 to 16 inch range. It will feel lighter and easier to guide. For felling larger trees, bucking wide logs, or milling, a 20 to 36 inch bar gives you more reach and cutting capacity, but it adds weight and requires more power. Match the bar to the saw’s torque so it does not bog down or wear out early. Also, make sure the bar length matches the setup requirements so the saw runs safely and efficiently.
Chain Pitch Gauge
Chain fit is where a lot of 572XP compatibility problems start, so you need to pay close attention to both pitch and gauge. You should match the chain pitch to the sprocket and bar because pitch is the spacing that determines which chains will run correctly. On many mid to large saws, you will see 3/8″ or .325″. Then check the gauge, which is the drive link thickness that must fit the bar groove. If you choose .058″, .063″, or .050″ improperly, the chain will not seat properly. That can hurt tension, raise wear, and increase kickback risk. If you replace parts, do not guess based on chain length alone. Match the exact pitch and gauge your bar and sprocket call for, and you will get better cutting performance and longer chain life.
Air Filter Compatibility
When it comes to air filter compatibility on a 572XP, make sure the filter matches your saw’s airbox, engine specifications, and airflow needs. Check the micron rating so you get the filtration level your work requires; a 25 micron filter can help control fine dust. Measure the filter’s dimensions and mounting interface so it seals correctly and fits without gaps. Confirm that it is designed for your exact engine model to prevent restricted intake and power loss. Choose paper media for cleaner jobs, or use foam or dual stage filters when you are cutting in dusty conditions. Clean or replace the filter at the intervals Husqvarna recommends, and do it sooner whenever dust builds up quickly.
Hand Guard Protection
A solid hand guard is a key safety feature on a 572XP, so choose one made from impact-resistant plastic or a metal composite that can deflect branches, debris, and flying chips. Make sure it shields both the front handle and the controls, because that helps protect your hands from kickback and flying debris while you work. You should also check that it mounts securely to the housing and handle without blocking throttle or choke access. Look for a design that keeps the bar and chain easy to see and still leaves enough room for gloves and a comfortable grip. Finally, confirm that the guard matches your saw’s model and mounting points, because a loose fit can reduce protection and create safety issues.
Ignition Coil Match
Getting the ignition coil match right is critical on a 572XP because the coil has to align with your engine’s electrical specs, mounting points, and ignition system type to deliver a strong, consistent spark. Check primary and secondary resistance, along with the required spark voltage, against the service manual so timing stays accurate. Make sure the mounting hole spacing, core size, and connector type fit cleanly, and confirm the coil’s air gap spec with a feeler gauge. That gap matters because even a small error can weaken spark or cause intermittent firing. You should also match the ignition style, whether magneto or CDI, and any trigger timing needs. Finally, choose a coil with solid heat, vibration, and insulation ratings for lasting reliability.
Frequently Asked Questions
What Makes the 572XP Better Than Similar Professional Chainsaws?
You get better power to weight, faster cutting, stronger acceleration, and smart engine tuning that keeps your 572XP responsive under load. You’ll also appreciate its ergonomic balance, low vibration, and reliable pro grade durability.
How Often Should I Service the 572XP for Peak Performance?
About 80% of saw failures start with neglect, so service your 572XP every 25 hours of heavy use. Clean it after each job, and inspect the filters, chain, and spark plug regularly.
Is the 572XP Suitable for Heavy-Duty Logging Work?
Yes, you can use the 572xp for heavy-duty logging, but it is best suited to medium-to-large felling, limbing, and bucking. Keep the chain sharp, maintain the saw properly, and take occasional breaks during sustained demanding work.
What Fuel Mix Ratio Does the 572XP Require?
You’ll mix the 572XP at 50:1 using fresh gasoline and quality two-stroke oil. For example, adding 2.6 ounces of oil to one gallon of gas will help protect the engine and keep it running smoothly.
How Does the 572XP Compare to the 565 Model?
You’ll find the 572XP offers more power, faster cutting, and better anti-vibration than the 565, while the 565’s lighter feel and lower cost suit smaller jobs. In short, you are choosing performance versus maneuverability.
